Test, Certificate; Hard-Copy Product Documentation - Endress+Hauser Levelflex FMP53 Technical Information

Levelflex FMP53

Test, certificate

Hard-copy product
documentation
Endress+Hauser
Feature 580 "Test, Designation
certificate"
JA 3.1 Material documentation, wetted metal parts, EN10204-3.1 inspection
certificate
KB Surface finish measurement ISO4287/Ra, wetted metal parts, inspection
certificate
KE Pressure test, internal procedure, inspection certificate
CF 3.1 Material certificate + Delta-Ferrite measurement, internal procedure,
wetted metal parts, inspection certificate
Test reports, declarations and inspection certificates are available in electronic format in the
W@M Device Viewer:
Enter the serial number that appears on the device (www.endress.com/deviceviewer)
This concerns the options for the following order codes:
• 550 "Calibration"
• 580 "Test, certificate"
• 590 "Additional approval", option LW: "CoC-ASME BPE"
Hard-copy versions of the test reports, declarations and inspection certificates can also be order via
order code 570 "Service", option I7 "Hard-copy product documentation". The documents are then
supplied with the product.
Approval
FMP53
FMP53
FMP53
FMP53
77