User Settings; Config Menu - Lexmark C500N Menus And Messages Manual

User Settings

Note: An asterisk (*) next to a value indicates the default setting.

Config Menu

Configuration options for the printer that control how the printer functions.
Menu selection Purpose
Timeout Specifies the amount of time in
seconds before a timeout occurs.
The timeout causes the printer's
reception of print data to be
suspended. It then causes the
printer to forcibly output the partially
received data so it can receive new
print data. The result may be a
printout with partial loss of data, an
incorrect printout, or no printout.
SleepMode Specifies whether or not to use the
printer's power saver feature.
SleepTime Specifies the amount of time (in
minutes) the printer waits after a job
is printed before it goes into a
reduced power state.
Port Specifies which interface port to be
used.
Priority Specifies priority between the LAN
interface port and the USB interface
port when both of them are enabled
in the Port submenu.
Using printer menus
Values
5 to 999 (300*)
OFF
ON*
OFF
30M*, 60M, 120M,
240M, 5M, and 15M
AUTO*
NET
USB
AUTO*
NET
USB
6
The printer enters sleep mode when
the time specified in "SleepTime"
has passed.
The power saver feature is disabled.
Specifies both the LAN port and the
USB port. Either port is
automatically used according to the
setting of the Priority submenu.
Specifies the LAN port. This setting
option prohibits the printer from
receiving print data through the
USB port.
Specifies the USB port. This setting
option prohibits the printer from
receiving print data through the LAN
port.
The printer alternately uses the LAN
port and the parallel port for
receiving print data.
The printer prioritizes the LAN port
for receiving print data, sometimes
causing no output of print data via
the USB port.
The printer prioritizes the USB port
for receiving print data, sometimes
causing no output of print data via
the LAN port.