Lexmark C500N Menus And Messages Manual page 8

Menu selection Purpose
TestMode Specifies the media type and print
mode when printing the test page,
configuration page, network
configuration page, and status
page.
Note: If you select a setting other
than TRANS, the specified media
type applies to printing regardless
of the actual type of media in the
selected input tray. Be sure to select
an applicable setting option in this
submenu.
Using printer menus
Values
PLAIN*
TRANS
LABEL
THIN
MTHICK
THICK1
THICK2
ENV1
ENV2
8
Select this for printing on plain
paper (75g/m² to 89g/m²).
Select this for printing on OHP film
(transparency). Printing with this
option stops until the media in tray 1
is replaced with a transparency.
Select this for printing on labels.
Select this for printing on light
weight paper (60g/m² to 74g/m²).
Select this for printing on thick
paper (90g/m² to 104g/m²).
Select this for printing on thick
paper (105g/m² to 163g/m²).
Select this for printing on thick
paper (164g/m² to 210g/m²).
Select this for printing on envelopes.