Lexmark C500N Menus And Messages Manual page 13

Error Recovery
JAM-A Tray, Rear
JAM-B, Rear
JAM-C, Rear
Output Tray Full
PM Error
Replace Toner x
Replace WT. Pack
Set Belt CG
Set Fuser Unit
Set Transfer Roll
Set Trayx
Set x Toner CG
SVC xxx ERROR
Toner CG Error
Trayx Load yyyy
Trayy Load zzzz
Understanding printer messages
1 Turn the printer off, and check all cable connections.
2 Turn the printer back on.
If the service message recurs, call for service, and report the message
number and description of the problem.
A paper jam has occured. Remove the jammed paper. For more
infomation, see the User's Guide on the Software and
Documentation CD.
The output tray is full. Remove all printed media from the output tray.
A page memory error has occured. To clear the message, turn the
printer off, wait 5 seconds, and turn the printer on. If the error message
continues, call for service.
The toner of color "x"—K (black), Y (yellow), M (magenta), or C (cyan)—
has been exhausted. Replace the toner cartridge for that color.
The waste toner bottle is full or missing. Replace or install a waste toner
bottle.
The photodeveloper belt is missing or not installed correctly. Install or
reseat the photodeveloper belt. For more infomation on installing the
photodeveloper belt, see the User's Guide on the Software and
Documentation CD.
The fuser is missing or not installed correctly. Install or reseat the fuser.
For more infomation on installing the fuser, see the User's Guide on the
Software and Documentation CD.
The transfer roller is missing or not installed correctly. Install or reseat
the transfer roller.
The paper tray x is missing or not installed correctly. Install or reseat the
indicated paper tray. For more infomation on installing paper trays, see
the User's Guide on the Software and Documentation CD.
The toner of color "x"—K (black), Y (yellow), M (magenta), or C (cyan)—
is missing or not installed correctly. Install or reseat the indicated toner
cartridge. For more infomation on installing toner cartridges, see the
User's Guide on the Software and Documentation CD.
1 Turn the printer off, and check all cable connections.
2 Turn the printer back on.
If the service message recurs, call for service, and report the message
number and description of the problem.
An invalid toner cartridge is installed. Remove the toner cartridge, and
install a supported one.
The specied paper tray (x) does not contain the correct media size
(yyyy). Load the indicated media size. For more information, see Media
size indications (yyyy).
The specied paper tray (x) does not contain the correct media type
(zzzz). Load the indicated media type. For more information, see Media
type indications (zzzz).
13