Advertisement
Quick Links
Quick start guide
XMC7200 evaluation kit
KIT_XMC72_EVK
Kit contents
1. XMC7200 evaluation board
2. USB Type-A to Micro-B cable
3. 12V/3A DC power adapter with additional blades
4. Six jumper wires (five inches each)
5. Quick start guide (this document)
www.infineon.com/KIT_XMC72_EVK
Advertisement
Related Manuals for Infineon XMC7200
Summary of Contents for Infineon XMC7200
- Page 1 Quick start guide XMC7200 evaluation kit KIT_XMC72_EVK Kit contents 1. XMC7200 evaluation board 2. USB Type-A to Micro-B cable 3. 12V/3A DC power adapter with additional blades 4. Six jumper wires (five inches each) 5. Quick start guide (this document)
- Page 2 Quick start guide USB cable connected to the KitProg3 Before you start USB connector 1. Ensure that you have the following: • PC with USB port • UART terminal software such as Tera Term or Minicom 2. Visit the kit website to download and install the required software.
- Page 3 Quick start guide XMC7200 evaluation board details 18 19 20 External power supply VIN connector (J6) Analog-IN header compatible with Arduino Uno R3 (J2) Power LED (LED5) SMIF dual header compatible with Digilent Pmod (J21, J22)* KitProg3 USB connector (J7)
- Page 4 Dual SMIF interface compatible with Digilent Pmod SMIF_INT_L SMIF_CS_L XMC7200D I/Os See the kit guide available at the kit website for details. Note: *Not connected Document number: 002-34393 Rev. *C Date: 09 / 2022 All rights reserved. © 2022 Infineon Technologies AG...