Filling The Rinse Aid Dispenser - Insignia NS-DWRF2SS3 User Manual

Front control dishwasher
Table of Contents

Advertisement

The amount of detergent required depends on the water hardness. Refer to the following table for the recommended
amount.
Cycle
Normal
Heavy
Express

Filling the rinse aid dispenser

Your dishwasher is designed to use a liquid rinse aid. The use of a rinse aid greatly improves drying performance after the
final rinse. Do not use a solid or bar-type rinse aid. Under normal conditions, the rinse aid will last approximately one
month. Try to keep the dispenser full, but do not overfill it.
1 Turn the rinse aid dispenser cap 1/4 turn counterclockwise and lift it out.
2 Add rinse aid until the liquid touches the indicated fill level. Do not overfill, since this can cause oversudsing. Wipe up
any spills with a damp cloth. The dispenser holds enough for 30 to 140 washes, depending on the dial setting.
3 Adjust the rinse aid dial, if necessary. See Using rinse aid on page 12 for information on proper adjustment of the rinse
aid setting.
4 Replace the cap and turn it 1/4 turn clockwise.
Soft Water
Medium Hard Water
(0-3 grains)
(4-8 grains)
2 tsp.
5 tsp.
(main wash
(main wash cup fill to
cup 1/4 full)
line above regular)
Less rinse aid
www.insigniaproducts.com
Hard Water (9-12
grains)
8 tsp.
(main wash cup
completely full)
Dispenser cap
More rinse aid
Front Control Dishwasher
Very Hard Water (over
12 grains)
Main wash cup
completely full (water
softener recommended)
11

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ns-dwrf2wh3

Table of Contents