Advertisement
Troubleshooting
Caution! Before troubleshooting, disconnect the power supply. Only a qualified electrician or competent person must
do the troubleshooting that is not in this manual.
Important! There will be some sound/noise during normal operation (compressor or refrigerant circulation).
PROBLEM
The appliance does
not work
Appliance freezes or
cools too much
The food is not frozen
enough
Heavy amount of
buildup of frost on the
door seal
Unusual noises
If your appliance shows other symptoms than those described above, or if you have checked all items listed as the
cause and the problem still exists, then call SUMMIT® Customer Service at 1-800-932-4267.
POSSIBLE CAUSE
The main plug is not plugged in
or is loose
The fuse has blown or is
defective
The electrical socket is defective Electrical malfunctions are to be
The temperature is set too low,
or the appliance is running at
SUPER modes
The temperature is not properly
adjusted.
The door was open for an
extended period
A large quantity of warm food
was placed in the appliance
within the last 24 hours
The appliance is near a heat
source
The door seal is not airtight
The appliance is not leveled
The appliance is not touching
the wall or other objects.
A component e.g., a pipe, on the
rear of the appliance is touching
another part of the appliance or
wall.
Insert the main plug
Check fuse, replace if necessary
corrected by an electrician.
Turn the temperature regulator to a
warmer setting temporarily.
Check the initial temperature setting
section.
Open the door only as necessary.
Temporarily turn the temperature
down.
Look at the installation location
sector of this user manual.
Carefully warm the leaking section
of the door seal with a hair dryer (on
a cool setting). At the same time
shape the warm door seal by hand
so that it sets correctly.
Readjust the leveling feet.
Move the appliance slightly.
If necessary, carefully bend the
component out of the way.
14
SOLUTION
Advertisement
