Mc-12 Set Zone2 Volume (Mc-12); Mc-12 Set Zone2 Left/Right Balance (Mc-12) - Lexicon MC-12 User Manual

Lexicon
MC-12 Serial Communications Protocol

7.3.52 MC-12 Set Zone2 Volume (MC-12)

Commands MC-12 to set the Zone 2 volume with the value in this packet.
7.3.52.1 Command Packet Description
Application Header:
Command
Data Count 1
Application Data:
Data[0]
7.3.52.2 Data Description
Value:
Data Type:
Max:
Min:
7.3.52.3 MC-12 Response
The MC-12 will assign the value from the packet to the Zone 2 volume.
7.3.52.4 Data Validation
If a value is passed that exceeds the maximum value of that parameter the MC-12 will ignore the command
and transmit a NAK command with an error code DC_INVALID_DATA.

7.3.53 MC-12 Set Zone2 Left/Right Balance (MC-12)

Commands MC-12 to set the Zone 2 balance to the value in this packet.
7.3.53.1 Packet Description
Application Header:
Command
Data Count 1
Application Data:
Data[0]
7.3.53.2 Data Description
Value:
Data Type:
Max:
Min:
7.3.53.3 MC-12 Response
The MC-12 will assign the value from the packet to the Zone 2 balance.
7.3.53.4 Data Validation
© 2005 Harman Specialty Group All rights reserved.
MC_CMD_SET_ZONE2_VOLUME
Value
Signed 8 bit integer (2's compliment)
+12 (0x0C) (12dB)
-80 (0xB0) (-80 dB)
MC_CMD_SET_ZONE2_BALANCE
Value
Signed 8 bit integer (2's compliment)
+16 (0x10) (Full Right)
-16 (0xF0) (Full Left)
Printed on: 07/13/05
0x45
0x01
nn
0x46
0x01
nn
52 of 106