Advertisement
ACM7004-‐2-‐LMA ACM7004-‐2-‐LMCR ACM7008-‐2-‐LMA
ACM7004-‐2-‐LMV ACM7004-‐2-‐LMCT ACM7008-‐2-‐LMV
Thank you for purchasing the Opengear Resilience Gateway (referred to herein as the
appliance ). This Quick Start walks you through installation, configuration & local
operation. More details are available in the User Manual , which can be downloaded from:
http://opengear.com/documentation
Step
1
Check
k it
c ontents
Step
2
Connect
t he
h ardware
Attach rubber feet to base, or attach the rack mount tab
Ø
Screw the antennas on to the
Ø
you have an optional GPS antenna, screw it on to the
Using a standard size Mini-SIM (2FF) card, insert the notched side firmly
Ø
into the bottom slot of the SIM holder, with contacts facing upwards
Insert the holder into the
Ø
Note:
modem devices, which are programmable to support either AT&T USA, Verizon USA,
Rogers Canada or Telus Canada. The -LMR with OCM73R4 supports most other carriers
globally, including major carriers in EMEA, APAC and ANZ regions. For more details, refer
to the Knowledge Base FAQ article OCM modem devices integrated in ACM7000
Resilience Gateways.
Connect the Ethernet NET1 port to your primary network
Ø
ACM700x-‐2-‐LMx
Q uick
S tart
( 520084-‐Rev
1 .1)
The -LMA, -LMV, -LMCR and -LMCT models include Opengear OCM cellular
Resilience Gateway appliance;
black
terminal block;
SIM holder; DB9F-RJ45 adapter (319015, to DTE); four
rubber feet; 12VDC power pack; Quick Start Guide.
(M) main and
Dual SIM slot, with longer guide arm to the left
ACM7008-‐2-‐LMR
Quick Start Guide
external rack
two 4G LTE blade antennas; dual
(A) diversity connectors – if
GPS connector
mount tab;
Page
1
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Opengear ACM7004-2-LMA
Summary of Contents for Opengear ACM7004-2-LMA
- Page 1 ACM7008-‐2-‐LMR Quick Start Guide Thank you for purchasing the Opengear Resilience Gateway (referred to herein as the appliance ). This Quick Start walks you through installation, configuration & local operation. More details are available in the User Manual , which can be downloaded from: http://opengear.com/documentation...
- Page 2 WAN connection. For details, refer to the Knowledge Base FAQ article Can I use Opengear cellular as a failover WAN link for a remote LAN? Connect your serial devices to the 4 or 8 SERIAL ports, connect your USB Ø...
- Page 3 If you have been allocated a private IP , direct remote access may not be possible. Instead, use Call Home or VPN to establish an outbound tunnel to an Opengear Lighthouse or VPN server, to enable remote access over the tunnel.
- Page 4 Auto-Response alerting and more. Please register your product to activate the warranty and to automatically receive advice of future firmware updates. Go to: http://opengear.com/product-registration ACM700x-‐2-‐LMx Q uick S tart ( 520084-‐Rev 1 .1) Page 4...
Need help?
Do you have a question about the ACM7004-2-LMA and is the answer not in the manual?
Questions and answers