Audio Player; Setting Up A Bluetooth Connection With Mobile Devices; Usb Devices And Memory Cards; Remote Control - Omnitronic MA Series User Manual

Audio player

The amplifier features an audio player for MP3 files from USB storage devices and SD cards as well as
wireless music streaming from your Bluetooth devices such as smartphones, tablets and notebooks. Use the
"MODE" button to select the desired signal source. The audio player can either be operated via the buttons
on the front panel or via the remote control. The level is adjusted by the "PLAYER" control.

Setting up a Bluetooth connection with mobile devices

Press the "MODE" button (repeatedly) until the display indicates "Bluetooth". The audio player will enter the
pairing mode. Now activate the Bluetooth function at the Bluetooth source and start the device scan. Select
"OMNITRONIC" from the list and connect the devices. Then play music at the Bluetooth source as you
normally would and the sound will come out of the speakers. You can operate the Bluetooth source with the
remote control, too.

USB devices and memory cards

Insert a USB device into the USB port. Slide memory cards into the card slot with the contacts facing right.
The display indicates the source selected. After loading a data carrier, it is selected as the playback medium
and the playback will start automatically.
To select folders on the player, first press the "FOLDER" button to activate folder selection mode. Then use
the "PREV" and "NEXT" buttons to browse the folders. Press "PLAY/PAUSE" to confirm a selection
(highlighted) and start playback.

Remote control

Button Function
Player on/off
MODE
Switches between USB/SD/Bluetooth
Mute on/off
Play/pause
►
Short actuation: previous/next title
/
Long actuation: fast rewind/forward
EQ Equalizer settings
VOL- / VOL+ Volume down/up
0-9 Direct title selection
SCN/RPT Random play and repeat functions
Before first operation, pull out the insulating foil on the back. To
change the battery, press the small latch with the notch to the
right and pull out the battery holder. Insert a button cell type
CR2025 into the holder with the positive pole facing upwards.
Remove the battery when not in use for a longer period of time.
24 • EN