Laser Safety Information - Optoma ZU920T User Manual

Laser Safety Information

‡ Complies with 21 CFR 1040.10 and 1040.11 except for conformance as a Risk Group 2 LIP as defined
in IEC 62471-5:Ed. 1.0. For more information see Laser Notice No. 57, dated May 8, 2019. IEC 60825-
1:2014: CLASS 1 LASER PRODUCT - RISK GROUP 2
‡ This projector has built-in Class 4 laser module. Disassembly or modification is very dangerous and should
never be attempted.
‡ Any operation or adjustment not specifically instructed by the user's guide creates the risk of hazardous laser
radiation exposure.
‡ Do not open or disassemble the projector as this may cause damage by the exposure of laser radiation.
‡ Do not stare into beam when the projector is on. The bright light may result in permanent eye damage.
‡ When turning on the projector, make sure no one within projection range is looking at the lens.
‡ Without following the control, adjustment or operation procedure may cause damage by the exposure of laser
radiation.
‡ Adequate instructions for assembly, operation, and maintenance, including clear warnings concerning
precautions to avoid possible exposure to laser and collateral radiation in excess of the accessible emission
limits in Class 2.
‡ The Class A digital apparatus meets all requirements of the Canadian Interference-Causing Equipment
Regulation. Interference-Causing Equipment Regulation.
‡ Cet appareil numerique de la class A respecte toutes les exigences du Reglement sur le materiel
brouilleur du Canada.
‡ Notice is given to supervise children and to never allow them to stare into the projector beam at any
distance from the projector.
‡ Notice is given to use caution when using the remote control for starting the projector while in front of the
projection lens.
‡ Notice is given to the user to avoid the use of optical aids such as binoculars or telescopes inside the
beam
6 English