Optoma ZU920T User Manual page 46

USING THE PROJECTOR
3D-2D
Transform the 3D content to 2D images.
3D: Play the 3D content normally.
‡
L: Play the left images of the 3D content.
‡
R: Play the right image of the 3D content.
‡
3D Sync Out
Set up the transmission of the 3D sync output signal.
To Emitter: Send the 3D sync signal to the emitter connected to the 3D sync out port.
‡
To Next Projector: Send the 3D sync signal to next projector when using multiple projectors.
‡
3D Invert
When the 3D video does not appear correctly, use this function to invert the 3D left and right frames.
Frame Delay
Set a frame delay value for the projector to correct the time difference between the 3D signal being given
and the result being executed. This function works only when L/R Reference is set to Field GPIO. When
performing 3D blending on multiple projectors, set the frame delay for each projector to correct the non-
synchronous images.
Reset
Reset the function settings to factory default values.
Note: When 2D High Speed or Blending mode is selected, the 3D Tech, 3D-2D, 3D Sync Out, 3D Invert,
Frame Delay will be unavailable.
Save to User
Save the image settings to the User mode.
Apply to User
Apply the image settings to User-Presentation, User-Bright, User-Cinema, User-HDR, User-sRGB, User-DICOM
SIM., User-Blending, User-3D, or User-2D High Speed.
Reset
Reset all the image settings to factory default values.
46 English