Using The Projector; Powering On / Off The Projector - Optoma ZU920T User Manual

USING THE PROJECTOR

Powering On / Off the Projector

Powering On
1. Securely connect the power lead and signal/source cable. When connected, the power LED will turn
red.
2. Set the power switch to the " " (On) position and wait until the " " button on the projector keypad is
solid red.
3. Turn on the projector by pressing the " " button on the projector keypad or remote control.
During startup the power LED is flashing red and during normal operation, the power LED is solid
green.
or
25
English