Menu Navigation And Features - Optoma ZU920T User Manual

USING THE PROJECTOR

Menu navigation and features

The projector has multilingual on-screen display (OSD) menus that allow you to make image adjustments and
change a variety of settings.
To open the OSD menu, press the Menu key on the remote control or projector keypad.
1.
2. To select a main menu or sub menu, use the
to enter the sub menu.
Press the Exit button to return to the previous menu or exit the OSD menu if at top level.
3.
4. Setting methods to adjust the function value or selection an option.
‡ To adjust the slide bar values, highlight the function, and use the
To check or uncheck a checkbox, highlight the function, and press Enter.
‡
‡ To input a number or symbol, highlight the number or symbol, and use the
make a selection. You can also use the number keys on the remote control or keypad.
‡ To select a function option, use the
shows at the navigation bar, the highlighted option is automatically applied. If there is an Enter
icon at the navigation bar, press Enter to confirm your selection.
Main menus
1
2
3
4
5
6
No
1. Image menu
2. Display menu
3. Input settings menu
pq
pq
Submenus
Picture Mode
Dynamic Range
Brightness
Contrast
Sharpness
Gamma
Dynamic Contrast
Color Settings
Wall Color
3D Setup
Select
Item
buttons to highlight it. Then, press the Enter button

buttons to make the selection. If no Enter icon
Image
Exit
Navigation guide
No Item
4. Device setup menu
5. Communication menu
6. Information menu
buttons to change value.
p q buttons to
Settings
Bright
Off
Enter
English
27