Table of Contents
Advertisement
‡
Please do not open or disassemble the projector as this may cause electric shock.
‡
Do not attempt to service the unit yourself. Opening or removing covers may expose you to dangerous
voltages or other hazards. Please call Optoma before you send the unit for repair.
‡
See projector enclosure for safety related markings.
‡
The unit should only be repaired by appropriate service personnel.
‡
Only use attachments/accessories specified by the manufacturer.
‡
Do not look into straight into the projector lens during operation. The bright light may harm your eyes.
‡
When switching the projector off, please ensure the cooling cycle has been completed before
disconnecting power. Allow 90 seconds for the projector to cool down.
‡
Turn off and unplug the power plug from the AC outlet before cleaning the product.
‡
Use a soft dry cloth with mild detergent to clean the display housing. Do not use abrasive cleaners,
waxes or solvents to clean the unit.
‡
Disconnect the power plug from AC outlet if the product is not being used for a long period of time.
‡
Do not setup the projector in places where it might be subjected to vibration or shock.
‡
Do not touch the lens with bare hands.
‡
Remove battery/batteries from remote control before storage. If the battery/batteries are left in the
remote for long periods, they may leak.
‡
Do not use or store the projector in places where smoke from oil or cigarettes may be present, as it can
adversely affect the quality of the projector performance.
‡
Please follow the correct projector orientation installation as non standard installation may affect the
projector performance.
‡
Use a power strip and or surge protector. As power outages and brown-outs can KILL devices.
Laser Radiation Safety Information
‡
This product is classified as CLASS 1 LASER PRODUCT - RISK GROUP 2 of IEC60825-1 : 2014 and
also complies with 21 CFR 1040.10 and 1040.11 as a Risk Group 2, LIP (Laser Illuminated Projector)
as defined in IEC 62471:5:Ed. 1.0. For more information see Laser Notice No. 57, dated May 8, 2019.
IEC 60825-1:2014, EN 60825 1 2014 A11 2021, EN 50689:2021 CLASS 1 CONSUMER
LASER PRODUCT RISK GROUP 2, Complies with 21 CFR 1040.10 and 1040.11 except for
conformance as a Risk Group 2 LIP as defined in IEC 62471-5:Ed.1.0. For more information
see Laser Notice No. 57, dated May 8, 2019.
IEC 60825-1:2014
IEC 60825-1:2014 1
‡
As with any bright source, do not stare into the direct beam, RG2 IEC 62471-5:2015.
‡
This projector is class 1 laser product of IEC/EN 60825-1:2014 and risk group 2 with the requirements
of IEC 62471-5:2015.
‡
Additional instructions to supervise children, no staring, and not use optical aids.
‡
Notice is given to supervise children and to never allow them to stare into the projector beam at any
distance from the projector.
‡
Notice is given to use caution when using the remote control for starting the projector while in front of
the projection lens.
- :
+
:
1
RG2
RG2
5
English
Advertisement
Table of Contents
