Programming And Operation - µ-Dimension D3206 User Manual

PROGRAMMING AND OPERATION

PROGRAMMING
Control Buttons (refer to Figure 4):
With the cover closed, you can access the SCENE PROGRAMMING/RECALL,
MAX, and OFF buttons. With the cover open, you can access the LCD Display,
the Wizard/Menus, Select/Next, Cancel/Previous, Page Zones, Dim Scene,
Dim/Bright, Zone Info, and Function/Shortcut buttons.
SCENES:
MAX:
OFF:
Wizard/Menus:
Select/Next:
Cancel/Previous:
Page Zones:
Dim Scene:
Dim/Bright:
Zone Info:
NOTE:
The SCENE, MAX, and OFF buttons will act on a particular group. In the
Basic B application this will not make a difference. However, in Advanced
applications you must ensure that programming of the scene bank is the same
as the zone group.
14
DI-000-D3206-00B
Selects a new scene to fade in. Named scenes will appear
in the display (LCD) when the button is pressed (i.e.,
Breakfast, Lunch, or Dinner).
Turns all Loads to maximum BRIGHT.
Turns all Loads OFF (opens the air-gap relay).
Toggles between Main Screen on LCD and several
programming screens (refer to Programming section).
Advances programming steps.
Returns to previously selected screen.
Toggles between local zones on current panel to remote
zones on a remote panel.
One touch control for dimming or brightening of set scene.
Allows for manual control of light level for selected zone.
Displays active Panel, Zone, Group, and Light Level
information.
Used to change Scene Banks.
Used to navigate through programming.
16
A
11/6/03, 10:59 AM