Preparing Your San Volume Controller Environment; Controller 2145-8F4 - IBM 2145-8F4 Installation Manual

The following figure shows an illustration of the type of connector located on the
power supply assembly. The connector allows you to connect the SAN Volume
Controller 2145-4F2 to the power source from the uninterruptible power supply.

Preparing your SAN Volume Controller environment

Before installing the SAN Volume Controller, you must prepare the physical
environment.
Preparing your SAN Volume Controller 2145-8F2 or SAN Volume
Controller 2145-8F4 environment
The following four tables list the physical dimensions and weight of the node, as
well as other environmental requirements that you must consider before you install
your SAN Volume Controller 2145-8F2 or SAN Volume Controller 2145-8F4:
Dimensions and weight
Additional space requirements
AC input-voltage requirements
8
fibre-channel port 1
Height Width
43 mm 440 mm
(1.69 in.) (17.32 in.)
Location
Left and right sides
Back
Power supply
assembly type
200 to 240 V
Neutral
Ground
Live
Depth
686 mm
(27 in.)
Additional space
requirements
50 mm
(2 in.)
Minimum:
100 mm (4 in.)
Voltage
88 to 264 V ac
Chapter 1. SAN Volume Controller overview
Maximum weight
12.7 kg
(28 lb)
Reason
Cooling air flow
Cable exit
Frequency
50 or 60 Hz
23