KJR120G S2/M2 & KJR120X
© 2021. Midea UK Copyright LTD.
HA HB
2 core CY 0.5mm-1/5mm connection between controller and unit(s)
•
When controlling more than one system, the units must be addressed using the Rotary
•
Dial S1 switch on the indoor PCB
Both the HA/HB and Jack plug versions of the controllers look very similar except for
•
the fly lead that is connected to the bottom of the jack plugged version. Bear this in
mind when attempting to wire the controllers. The jack plugged version cannot be
connected using HA/HB even though the terminals are present
HA HB
HA HB
9