Midea GA Series Quick Manual page 16

SW8/SW5 – Twin Split Setting

Both Master (first one connected to the condenser) and Slave need their status set

using SW8 –

Master

SW8/SW5

Slave

SW8/SW5

Slave units will do exactly what the Master is set for and become totally ignorant to

any form of control. Therefore no settings or controller wiring (remote on-off/central

controller address and wiring etc) need to be changed or added to the slave

Hard wired controllers only need to be wired to Master

Bit 1

Bit 1 & 2

Table of Contents