Updating The Screen; Operating The Screen Buttons - Legamaster EVOLVE ETX-6530 Instruction Manual

OPERATING THE SCREEN

3.4 UPDATING THE SCREEN

Before first using the screen, please update it to the latest firmware version. Evolve ETX 30 touch monitors
can be updated in 2 ways, Over-the-Air (Internet connection required) or using a USB-drive.
To update to the latest firmware version using OTA, open the Quick Launch menu by tapping the center
button "O" on the touch monitor. From this menu, click on the setting option to open the main settings-
menu and navigate to Device -> System Updates -> Online Update. You will be prompted with a download
option if an update is available.
NOTE: please verify that the correct server URL is entered: http://68.66.241.101:8080/ota30/upgrade
To update to the latest firmware version using a USB Drive, open the Quick Launch menu by tapping the
center button "O" on the touch monitor. From this menu, click on the setting option to open the main
settings-menu and navigate to Device -> System Updates -> local Update (USB).

3.5 OPERATING THE SCREEN BUTTONS

The screen features three buttons integrated in the screen's frame these buttons have two different
functionalities depending on the press time on them:
1. Back Button:
- Short Press: Will simple go back to the previous menu/ option.
- Long Press: Will open the input selection menu.
2. Home Button:
- Short Press: Will take you to the home screen.
- Long Press: Will turn the screen OFF
3. Square Button:
- Short Press: Will open the recently used Apps.
- Long Press: Will open the Quick Menu
Product Content & Operation - Version 1.0
21