Cleaning - Legamaster EVOLVE ETX-6530 Instruction Manual

SAFETY INSTRUCTIONS
Don't use any kind of liquid on the e-screen.
• If liquid is spilled on the e-screen, remove the power plug from the wall socket and ask qualified service
personnel to check the product.
• If liquid gets on e-screens glass plate, clean it with a dry and soft cloth immediately.
• Don't use any chemicals on the e-screen.
• If metal or liquids get into the e-screen, it may cause a fire or an electrical shock.
Don't install or remove the power plug with wet hands. This may cause an electrical shock.
If the e-screen will not be used for a long period of time, unplug the display. Preventing to do so may cause
premature wear of electrical components or fire.
Handle the e-screen with care, prevent glass breakage.
• If the glass of the e-screen is broken, liquids may escape. Please don't touch the liquid.
• If these liquids come into contact with skin or eyes, immediately wash it away with clean water and consult
a medical professional.
Precautions with the remote-control batteries
• Please only use approved AAA type batteries.
• Please be sure to insert batteries by matching the + and -.
• Don't recharge, heat, disassemble, short or throw batteries into a fire.
• Don't mix a new battery with a used one.
• Don't mix different types of batteries together (only use the specified type).

2.6 CLEANING

Remove the power plug from the power outlet before cleaning.
Failure to do so may result in electrical shock or damage.
Cleaning the surface of the e-screen
• When the surface of the e-screen becomes dirty, wipe the surface lightly with a soft clean cloth.
• If the surface requires additional cleaning, lightly moisten the cloth.
• Do not to let any kind of liquid enter the e-screen as it may cause electrical shock or damage.
• Do not clean the e-screen with alcohol, solvents or ammonia, as this could damage the e-screen.
8
Product Content & Operation - Version 1.0