Legamaster EVOLVE ETX-6530 Instruction Manual page 20

OPERATING THE SCREEN
MAIN SETTINGS LEVEL1
Auto sense
Temperature
protection
Palm
Rejection
Current
temperature
Alam
temperature
HDMI
More
Date & time
Languages
Keyboard &
inputs
Individuation
Device name
Device model
System
information
Database
Device
Copy
System
Updates
Reset
Product Content & Operation - Version 1.0
LEVEL2 VALUES
OFF/Prompt/Direct
ON/OFF
ON/OFF
0-100
50-100
HDMI out
1080p 60Hz/2160p 30Hz/2160p 60Hz
HDMI EDID
version EDID 1.4/EDID 2.0
Automatic date
ON/OFF
& time
Date
Time
Time zone
Use 24-hour
ON/OFF
format
Deutsch/English/Francais/Nederlands/Spanish
Current
Keyboard
Android
Keyboard(AOSP)
Manage
keyboards
Fullscreen
ON/OFF
Gesture
Show Menu at
ON/OFF
right
Set wallpaper
Set 'no input'
wallpater
Set source label
Firmware version
Export to USB
Import from USB
Local update
Online update
EXPLANATION
Select the auto sense mode. In auto sense, the screen will
detect new active signals and switch to that source
automatically (direct), or when confirmed (prompt). When
a signal is switched off, autosense will automatically check
for other active sources in the sequence OPS slot, HDMi 1,
HDMi 2, HDMi 3, DisplayPort, USB C, VGA always ending in
the Android launcher (when enabled)
With temperature protection, a user can set an alarm
temperature in which the screen will shutdown
automatically
Enable / Disable Palm Rejection
shows the current temperature of the screen
set the alam temperature value. When reached, the screen
will automatically shutdown to prevent further
temperature increase
set the HDMI out signal
set the HDMI EDID version
Automatic date and time requires an active internet
connection. Disabling this setting allows users to maually
set the date & time
Show or set the current date
show or set the current time
set the time zone
Choose between a 12 or a 24 hr time format
Set the language
Shows the current keyboard / allows users to switch
keyboards
Configure the default (AOSP) keyboard
Manage keyboards
Enable/Disable Fullscreen Gestures
Swtches the menu from the left as a default to the right.
change and set the wallpaper
change and set the no input wallpaper
Label various sources for easier recognition
show or change the device name
shows the device model
shows all system information
Export the screen configuration to a USB drive
Import the screen configuration from a USB drive
Updates the systems firmware using a USB drive
Checks for updates online
Restore factory settings. NOTE! This will erase all custom
settings, data and custom apps from your system
20