IMPORTANT INFORMATION 1. IMPORTANT INFORMATION WARNING: TO PREVENT FIRE OR SHOCK HAZARDS, DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE. ALSO, DO NOT USE THIS UNIT‘S POLARIZED PLUG WITH AN EXTENSION CORD RECEPTABLE OR OTHER OUTLETS UNLESS THE PRONGS CAN BE FULLY INSERTED.REFRAIN FROM OPENING THE E-SCREENS HOUSING AS THERE ARE HIGH VOLTAGE COMPONENTS INSIDE.
SAFETY INSTRUCTIONS 1.2. EXEMPTIONS 2.1 SAFETY PRECAUTIONS • This product isn’t warranted for any damage If smoke or a peculiar smell comes from the e- caused by natural disaster (such as earthquake, Screen, remove the power plug from the outlet thunder, etc.), fire, acts by third parties, immediately.
SAFETY INSTRUCTIONS 2.2 MOVING AND CARRYING 2.3 INSTALLATION NOTICE Don‘t install in a high-temperature environment. Moving the product: If the e-screen is used in high-temperatures or in direct sunlight, it may cause the housing of the product or other parts to become distorted or Moving the product requires at least four damaged, resulting in overheating or electrical people.
SAFETY INSTRUCTIONS Don‘t move the e-screen when it is connected to the power cord and AV cables. • When moving the e-screen, make sure to remove all cables first. • When unpacking or carrying the e-screen, at least 4 people are needed. Make sure the e-screen is carried upright.
SAFETY INSTRUCTIONS 1. Do not install screens in direct sunlight, humid conditions, or high temperatures. 2.5 RECOMMENDED USE If you encounter a problem during installation, please contact your supplier for assistance. Don’t repair or open the e-screen by yourself. Failure to do so may result in fire or electrical shock. Contact your dealer for inspection.
SAFETY INSTRUCTIONS Don’t use any kind of liquid on the e-screen. • If liquid is spilled on the e-screen, remove the power plug from the wall socket and ask qualified service personnel to check the product. • If liquid gets on e-screens glass plate, clean it with a dry and soft cloth immediately. •...
Page 9
Touchscreen display Product Content & Operation English Deutsch Nederlands Français Español Product Content & Operation - Version 1.0...
Page 10
TABLE OF CONTENTS 01 PACKAGE CONTENT 1.1 UNPACKING 1.2 INCLUDED ACCESORIES 02 INSTALLATION 2.1 ENVIROMENT CONDITIONS 2.2 GENERAL OVERVIEW OF THE SCREEN 2.3 INPUT / OUTPUT CONNECTOR INFORMATION 2.4 REMOTE CONTROL 2.4.1 CHANGING THE REMOTE-CONTROL BATTERY 03 TURNING THE SCREEN ON AND OFF 3.1 OPERATING THE SCREEN FOR THE FIRST TIME 3.2 QUICK LAUNCH MENU 3.3 SETTINGS MENU...
PACKAGE CONTENT / INSTALLATION 1. PACKAGE CONTENT 1.1. UNPACKING • The Touch Monitor is packed using cushions to protect the product during shipping. • Before unpacking, prepare a stable, level, and clean surface near a wall outlet. • Step 1: Place the box in an up-right stable position. •...
OVERVIEW 2.2 GENERAL OVERVIEW OF THE SCREEN Easy Fix Point Extra Thin Bezel For Easy Fix Camera High Precision IR (Optional) Touch System Easy access Buttons USB Ports Back, Home & Open Down facing USB Ports for Apps easy connection Main Power 110V-220V OPS Slot...
OVERVIEW / OPERATING THE SCREEN 2.4.1 CHANGING THE REMOTE-CONTROL BATTERY 1. Remove the battery cover: On the backside of the remote-control, slide down the battery cover. 2. Insert batteries: Use two AAA batteries and insert them according to the plus and minus indicators in the remote control. 3.
OPERATING THE SCREEN 3.1 OPERATING THE SCREEN FOR THE FIRST TIME When first starting up your screen you will be prompted to set-up some basic options: Step 1: Language Step 2: Choose your set-up, this step will let you select a default profile including premade configurations being the fastest start, option two will be a custom set up that includes multiple screen customization options and lastly option three is loading a backup option, to load a preexisting configuration via a USB stick.
• Calendar: opens up a calendar Action-buttons: Power-buttons: • < Back / previous screen • Shutdown: shuts down the • O Home (Legamaster screen and when applicable the launcher home-screen) OPS computer. • Overview: Shows all open apps and allows users to •...
OPERATING THE SCREEN 3.3 SETTINGS MENU MAIN SETTINGS EXPLANATION LEVEL1 LEVEL 2 VALUES shows the MAC address for the wired connection address Ethernet shows the IP address for the wired connection IP address Toggle ethernet-connection on / off for the screen itself. Disabling this Ethernet ON/OFF does not disable ethernet for the OPS...
Page 18
OPERATING THE SCREEN MAIN SETTINGS EXPLANATION LEVEL1 VALUES Audio output Choose the Audio output Speaker/SPDIF/ARC/Bluetooth Sound mode Select a pre-set sound mode. 'User' allows manual sound Standard/Music/Movie/Sports/User settings SPDIF Mode Toggle SP/DIF mode between RAW / PCM RAW/PCM toggle AVC on / off ON/OFF Sound Effect toggle sound effect on / off...
Page 19
OPERATING THE SCREEN MAIN SETTINGS LEVEL1 LEVEL2 VALUES EXPLANATION Change Change your password password Safe mode ON/OFF Safe mode password-protects the complete settings menu App lock Select individual apps that will be password-protected install/uninstal ON/OFF App (de)install lock disables (de)installation of apps l lock Security Touch lock...
Page 20
OPERATING THE SCREEN MAIN SETTINGS LEVEL1 LEVEL2 VALUES EXPLANATION Select the auto sense mode. In auto sense, the screen will detect new active signals and switch to that source automatically (direct), or when confirmed (prompt). When Auto sense OFF/Prompt/Direct a signal is switched off, autosense will automatically check for other active sources in the sequence OPS slot, HDMi 1, HDMi 2, HDMi 3, DisplayPort, USB C, VGA always ending in the Android launcher (when enabled)
OPERATING THE SCREEN 3.4 UPDATING THE SCREEN Before first using the screen, please update it to the latest firmware version. Evolve ETX 30 touch monitors can be updated in 2 ways, Over-the-Air (Internet connection required) or using a USB-drive. To update to the latest firmware version using OTA, open the Quick Launch menu by tapping the center button “O”...