IMPORTANT INFORMATION 1. IMPORTANT INFORMATION WARNING: TO PREVENT FIRE OR SHOCK HAZARDS, DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE. ALSO, DO NOT USE THIS UNIT‘S POLARIZED PLUG WITH AN EXTENSION CORD RECEPTABLE OR OTHER OUTLETS UNLESS THE PRONGS CAN BE FULLY INSERTED.REFRAIN FROM OPENING THE E-SCREENS HOUSING AS THERE ARE HIGH VOLTAGE COMPONENTS INSIDE.
SAFETY INSTRUCTIONS 1.2. EXEMPTIONS 2.1 SAFETY PRECAUTIONS • This product isn’t warranted for any damage If smoke or a peculiar smell comes from the e- caused by natural disaster (such as earthquake, Screen, remove the power plug from the outlet thunder, etc.), fire, acts by third parties, immediately.
SAFETY INSTRUCTIONS 2.2 MOVING AND CARRYING 2.3 INSTALLATION NOTICE Don‘t install in a high-temperature environment. Moving the product: If the e-screen is used in high-temperatures or in direct sunlight, it may cause the housing of the product or other parts to become distorted or Moving the product requires at least four damaged, resulting in overheating or electrical people.
SAFETY INSTRUCTIONS Don‘t move the e-screen when it is connected to the power cord and AV cables. • When moving the e-screen, make sure to remove all cables first. • When unpacking or carrying the e-screen, at least 4 people are needed. Make sure the e-screen is carried upright.
SAFETY INSTRUCTIONS 1. Do not install screens in direct sunlight, humid conditions, or high temperatures. 2.5 RECOMMENDED USE If you encounter a problem during installation, please contact your supplier for assistance. Don’t repair or open the e-screen by yourself. Failure to do so may result in fire or electrical shock. Contact your dealer for inspection.
SAFETY INSTRUCTIONS Don’t use any kind of liquid on the e-screen. • If liquid is spilled on the e-screen, remove the power plug from the wall socket and ask qualified service personnel to check the product. • If liquid gets on e-screens glass plate, clean it with a dry and soft cloth immediately. •...
Page 9
Touchscreen display Product Content & Operation English Deutsch Nederlands Français Español Product Content & Operation - Version 1.0...
Page 10
TABLE OF CONTENTS 01 PACKAGE CONTENT 1.1 UNPACKING 1.2 INCLUDED ACCESORIES 02 INSTALLATION 2.1 ENVIROMENT CONDITIONS 2.2 GENERAL OVERVIEW OF THE SCREEN 2.3 INPUT / OUTPUT CONNECTOR INFORMATION 2.4 REMOTE CONTROL 2.4.1 CHANGING THE REMOTE-CONTROL BATTERY 03 TURNING THE SCREEN ON AND OFF 3.1 SCREEN BASIC OPERATION 3.2 SETTINGS MENU 04 TROUBLESHOOTING...
PACKAGE CONTENT / INSTALLATION 1. PACKAGE CONTENT 1.1. UNPACKING • The Touch Monitor is packed using cushions to protect the product during shipping. • Before unpacking, prepare a stable, level, and clean surface near a wall outlet. • Step 1: Place the box in an up-right stable position. •...
OVERVIEW 2.2 GENERAL OVERVIEW OF THE SCREEN IR Touch Thin Bezel Uniform thin bezel all High Precision IR around the screen Touch System Power Button Power the screen ON & OFF OPS Slot OPS Standard Connector Main Power 110V-220V CONNECTOR BAY Main Power Switch All inputs &...
OVERVIEW 2.3 INPUT / OUTPUT CONNECTOR INFORMATION USB-B 2.0 (x1) Touch USB HDMI 2.0 (x1) DP 1.2 (x2) Audio Out 3.5 Jack 2.4 REMOTE CONTROL Standby Switch: Turn the display ON & OFF. Mute: Turn audio ON & OFF Menu: Direct access to the main settings Menu Source Selection Displays the input selection screen to select from Select / Confirm: Confirm your on-screen selection.
OVERVIEW / OPERATING THE SCREEN 2.4.1 CHANGING THE REMOTE-CONTROL BATTERY 1. Remove the battery cover: On the backside of the remote-control, slide down the battery cover. 2. Insert batteries: Use two AAA batteries and insert them according to the plus and minus indicators in the remote control. 3.
OPERATING THE SCREEN 3.1 SCREEN BASIC OPERATION Click the “ “button on the remote control to access the menu adjustment screen, which supports brightness, contrast and image color temperature adjustments, OSD settings, device factory rest and other options. Brightness & Contrast: Adjust the display brightness and contrast using the up and down cursor keys on your remote control.
OPERATING THE SCREEN 4. TROUBLESHOOTING FOR FREQUENTLY ASKED QUESTIONS, PLEASE VISIT: WWW.FAQ.LEGAMASTER.COM SYMPTOM POSSIBLE CAUSE SOLUTION Please make sure that The screen does not There could be a the power cable is display an image, there power connection connected and that the is no sound and the issue.
WARRANTY For information about the warranty of this product please check our Warranty Coverage and Statement on our website: www.legamaster.com/service/warranty Product Content & Operation - Version 1.0...