Package Content; Unpacking; Included Accesories; Installation - Legamaster EVOLVE ETX-6530 Instruction Manual

PACKAGE CONTENT / INSTALLATION

1. PACKAGE CONTENT

1.1. UNPACKING

• The Touch Monitor is packed using cushions to protect the product during shipping.
• Before unpacking, prepare a stable, level, and clean surface near a wall outlet.
• Step 1: Place the box in an up-right stable position.
• Step 2: Remove the white handles and cut the banding
• Step 3: Smoothly lift the upper part of the box, this will reveal the touch monitor box content
• Step 4: Remove the top cushion and take the accessory bag out.
• Step 5: Extend the bag up and carefully cut the upper layer to unseal the touch monitor bag
• Step 6: Prepare your screen for installation, and then remove it from the box by lifting it.

1.2. INCLUDED ACCESORIES.

2. INSTALLATION

2.1 ENVIROMENT CONDITIONS

When operating the screen, ambient room conditions should not exceed the following:
•
Operating temperature: -5˚C to 45˚C (41˚F to 104˚F)
•
Humidity: less than 90% RH (Max)
Product Content & Operation - Version 1.0
Power Cord 1.8m
Remote Control
Passive Stylus x2
ITEMS
11