Configuration Via Button - HIKVISION DS-K3G501LX Series User Manual

DS-K3G501LX Series Tripod Turnstile User Manual

5.1 Configuration via Button

Button Description
The buttons are on the lane control board.
Exit Button
Single press to open the gate from the entrance position.
●
Double press to open the gate from the exit position.
●
Parameter Configuration Button
LEFT: Press to add ten to configuration data
●
RIGHT: Press to add one configuration data
●
CANCEL: Return to the level-1 menu, or exit the configuration from the level-1 menu
●
OK: Confirm the data, or enter configuration mode, or enter the submenu
●
Note
Configuration data is displayed by two digital tubes.
●
Level-1 Menu: If the decimal point on the right is on, it indicates the level-1 menu. The
●
number represents the configuration item number.
Level-2 Menu: if the decimal point in the middle is on, it indicates the level -2 menu. The
●
number represents the parameters of a configuration item.
Figure 5-1 Button
15