DS-K3G501LX Series Tripod Turnstile User Manual
Note
You will need to prepare the 14AWG power cable to connect the AC power input to power
●
supply.
The fire alarm module, face recognition module and exit button use the same grounding
●
interface.
Gate opens at the entrance/exit: connect to BTN1/BTN2 and GND.
●
The two 12 V power output interfaces are the power supply for face recognition terminals,
●
which is only supported by the product with power switch.
For models with power adapter, the power supply for face recognition modules is not contained
●
in package
Figure 4-3 General Wiring of Pedestal with Power Switch
Figure 4-4 General Wiring of Pedestal with Power Adapter
13