HIKVISION DS-K3G501LX Series User Manual page 18

DS-K3G501LX Series Tripod Turnstile User Manual
1. Prepare for the installation tools, check the components, and prepare for the installation base.
2. Drill holes on the ground according to the installation holes on the pedestals and insert the
expansion sleeves.
3. According to the entrance and exit marks on the pedestals, move the pedestals to the position.
4. Seal the bottom of the turnstile to avoid water from entering.
Note
Make sure the installation holes on the pedestals and the base are aligned with each other.
5. Secure the pedestals with expansion bolts.
Note
Do not immerse the pedestal in the water. In special circumstances, the immersed height should
be no more than 690 mm.
6. Install the arms with 3 screws.
Note
Apply thread glue on the screws before securing the arms, in order to prevent the arms from
dropping down because of the vibration or the long time usage of the device.
Figure 3-2 Dimension
8