Led Indicators - Datalogic Joya Touch 22 User Manual

GETTING STARTED

LED INDICATORS

The LEDs illuminate to indicate various functions or errors on the device. The following
table lists the default indications. The good read LED indicator is programmable, and
may or may not be enabled ("
Charging LED is configurable via SDK.
LED
Left and Right LEDs
Bottom LED (Good
Read)
30
JOYA™ TOUCH 22
Scanner & Decoder" on page 32
Default Status
The two LEDs blink alternately in case of critical charge (the
device is charging, but the battery level is too low to turn on).
The two LEDs blink once simultaneously after a full shutdown.
Illuminates when a good decode is completed.
for more details). The