Charging Instructions; Charge With The Single Slot Dock Locking - Datalogic Joya Touch 22 User Manual

CHARGING INSTRUCTIONS

The Joya Touch 22 is provided with the battery pack already installed and configured in
Ship Mode at the factory. To wake the device from Ship Mode, connect it to a power
supply or insert it into a dock (for more information, see the Getting Started section of
the Joya Touch 22 User's Manual).
The battery pack is initially not fully charged. Before using the device, charge the battery
with the single slot dock locking, the single slot dock charge only, the 3-slot cradle or the
Datalogic USB-C type power supply.

CHARGE WITH THE SINGLE SLOT DOCK LOCKING

First plug the power cord into the power connector on the back of the dock, then con-
nect the power cord to the power supply.
CAUTION: Use only the Datalogic power supply 91ACC0048 to power the
Joya Touch Single Slot Dock Locking.
The Single Slot Dock Locking cannot be daisy-chained to a Joya Touch 3-
Slot Cradle.
NOTE: Insert the device into the dock with the screen facing front and the
head facing down.
The Single Slot Dock Locking can be unlocked using the unlock key pro-
vided with the cradle or by software sending an unlock command from the
inserted device.
For further information on the Joya Touch Single Slot Dock Locking, refer
to the Single Slot Dock Locking Quick Start Guide, included in the dock's
box.
9
USER'S MANUAL