Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for LevelOne OfficeCon FSW-0822
Summary of Contents for LevelOne OfficeCon FSW-0822
-
Page 1: User Manual
LevelOne FSW-0822 4+4PoE Ethernet Switch User Manual Version 1.0-0606... - Page 2 FCC Certifications This Equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment.
-
Page 3: Unpacking Information
By integrating the data transmitting cable and power cord, it eliminates the effort constructing your network. You could easily connect a Wireless AP or a VoIP phone to this switch without looking outlets for them. Over current protection and circuit shorting protection are also supported to ensure the safety. -
Page 4: The Front Panel
The front panel consists of LED indicators Please refer to the following paragraph for detailed LED definition. LEDs Definition The switch contain 1* power LED for the device, 1*10/100M LED for each port and 1*PoE LED for port 1 ~ port 4. System LED... -
Page 5: The Rear Panel
Installation This switch can be placed on your desktop directly, or mounted in a rack. The installation is a snap. Users can use all the features of the switch with simply attaching the cables and turning the power on. Before installing the switch, we strongly recommend: The switch is placed with appropriate ventilation environment. - Page 6 Rack-mount Installation Rack mounting facilitate to an orderly installation when series of networking devices being installed. The switch is supplied with rack mounting brackets and screws for rack mounting the unit. Procedures to Rack-Mount the Switch in the rack: Disconnect all the cables from the switch before continuing.
-
Page 7: Product Specifications
Product Specifications IEEE802.3 10BASE-T IEEE802.3u 100BASE-TX Standard IEEE802.3af Power over Ethernet IEEE802.3x flow control 8 * 10/100 Mbps auto MDI/MDI-X RJ-45 ports Interface (Port1~4 support PoE power feeding) Network Data 10/100 Mbps Auto-negotiation Rate Transmission 10/100Mbps Full-duplex, Half-duplex Mode System: Power LED indications Ports: 10/100M, PoE...
Need help?
Do you have a question about the OfficeCon FSW-0822 and is the answer not in the manual?
Questions and answers