Isuzu 2008MY N Series Workshop Manual page 91

Engine control system
Table of Contents

Advertisement

1A-88
Engine Control System (4HK1)
Step
1.
Turn OFF the ignition.
2.
Disconnect
connector.
3.
Connect a test lamp between the high side
5
circuit (pin 1 of E-17) and a known good
ground.
4.
Turn ON the ignition, with the engine OFF.
Does the test lamp illuminate?
1.
Turn OFF the ignition.
2.
Connect a test lamp between the low side
circuit (pin 2 of E-17) and battery voltage.
6
3.
Turn ON the ignition, with the engine OFF.
Does the test lamp illuminate?
1.
Test the high side circuits between the ECM
(pins 105 and 113 of E-12) and the FRP
regulator (pin 1 of E-17) for a short to battery
or ignition voltage.
7
2.
Repair the circuit(s) as necessary.
Did you find and correct the condition?
1.
Test the low side circuits between the ECM
(pins 89 and 97 of E-12) and the FRP
regulator (pin 2 of E-17) for a short to ground.
8
2.
Repair the circuit(s) as necessary.
Did you find and correct the condition?
1.
Test the high side circuits between the ECM
(pins 105 and 113 of E-12) and the FRP
regulator (pin 1 of E-17) for the following
conditions:
• An open circuit
• A short to ground
9
• A short to the low side circuit
• High resistance
2.
Repair the circuit(s) as necessary.
Did you find and correct the condition?
Important: The ECM may be damaged if the FRP
regulator low side circuit is shorted to a voltage
source.
1.
Test the low side circuits between the ECM
(pins 89 and 97 of E-12) and the FRP
regulator (pin 2 of E-17) for the following
conditions:
10
• An open circuit
• A short to battery or ignition voltage
• High resistance
2.
Repair the circuit(s) as necessary.
Did you find and correct the condition?
1.
Inspect for an intermittent and for poor
connections at the harness connector of the
FRP regulator (pins 1 and 2 of E-17).
11
2.
Repair the connection(s) as necessary.
Did you find and correct the condition?
Action
the
FRP
regulator
harness
Value(s)
Yes
Go to Step 6
Go to Step 11
Go to Step 15
Go to Step 15
Go to Step 15
Go to Step 15
Go to Step 15
No
Go to Step 9
Go to Step 10
Go to Step 14
Go to Step 14
Go to Step 12
Go to Step 12
Go to Step 13

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents