Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Seagate FIRECUDA ST2000DX002
Summary of Contents for Seagate FIRECUDA ST2000DX002
- Page 1 ™ Product Manual ST2000DX002 ST1000DX002 100804185, Rev. A July 2016...
- Page 2 Seagate, Seagate Technology and the Swirl logo are registered trademarks of Seagate Technology LLC in the United States and/or other countries. Seagate AcuTrac, OptiCache, Smar- tAlign, FireCuda and SeaTools are either trademarks or registered trademarks of Seagate Technology LLC or one of its affiliated companies in the United States and/or other countries. All other trademarks or registered trademarks are the property of their respective owners.
-
Page 3: Table Of Contents
Seagate® Technology Support Services ........ - Page 4 S.M.A.R.T. commands............. . 30 Seagate FireCuda Product Manual, Rev. A...
- Page 5 Mounting dimensions (1TB model) ............. 21 Seagate FireCuda Product Manual, Rev. A...
-
Page 6: Seagate® Technology Support Services
For information regarding online support and services, visit: http://www.seagate.com/contacts/ For information regarding Warranty Support, visit: http://www.seagate.com/support/warranty-and-replacements/ For information regarding data recovery services, visit: http://www.seagate.com/services-software/data-recovery-services/ For Seagate OEM, Distribution partner and reseller portals, visit: http://www.seagate.com/partners/ Seagate FireCuda Product Manual, Rev. A... -
Page 7: Introduction
• Native Command Queuing with command ordering to increase performance in demanding applications • Quiet operation • Seagate AcuTrac™ servo technology delivers dependable performance, even with hard drive track widths of only 75 nanometers. • Seagate OptiCache™ technology boosts overall performance by as much as 45% over the previous generation. -
Page 8: Drive Specifications
<9.5ms (write) Startup current 12V 2.0A 5V: ±5% Voltage tolerance (including noise) 12V: +10% / -7.5% Non-Operating (Ambient °C) –40° to 70° Operating ambient temperature (min °C) 0° Operating temperature (Drive case max °C) 60° Seagate FireCuda Product Manual, Rev. A... -
Page 9: Formatted Capacity
2000GB 3,907,029,168 4096 ST1000DX002 1000GB 1,953,525,168 *One GB equals one billion bytes and 1TB equals one trillion bytes when referring to hard drive capacity. Accessible capacity may vary depending on operating environment and formatting. Seagate FireCuda Product Manual, Rev. A... -
Page 10: Lba Mode
20.17mm / 0.7825 in 101.6mm / 4.0 in (± 0.010 in) Maximum width (all models) 146.99mm / 5.787 in Maximum length (all models) Typical weight 535g / 1.18 lb 400g / 0.88 lb Cache buffer 64MB (64,768kb) Seagate FireCuda Product Manual, Rev. A... -
Page 11: Seek Time
Idle mode power is measured with the drive up to speed, with servo electronics active and with the heads in a random track location. • Standby mode During Standby mode, the drive accepts commands, but the drive is not spinning, and the servo and read/write elec- tronics are in power-down mode. Seagate FireCuda Product Manual, Rev. A... -
Page 12: Conducted Noise
10MHz. Equivalent resistance is calculated by dividing the nominal voltage by the typical RMS read/write current. Note 2.8.3 Voltage tolerance Voltage tolerance (including noise): • 5V ±5% • +10% / -7.5% Seagate FireCuda Product Manual, Rev. A... -
Page 13: Power-Management Modes
If the standby timer reaches zero before any drive activity is required, the drive makes a transition to Standby mode. In both Idle and Standby mode, the drive accepts all com- mands and returns to Active mode when disk access is necessary. Seagate FireCuda Product Manual, Rev. A... -
Page 14: Environmental Specifications
2.9.3.2 Wet bulb temperature Operating 26°C / 78.8°F (rated) Non-operating 29°C / 84.2°F (rated) 2.9.4 Altitude Operating –304.8m to 3048m (–1000 ft. to 10,000+ ft.) Non-operating –304.8m to 12,192m (–1000 ft. to 40,000+ ft.) Seagate FireCuda Product Manual, Rev. A... -
Page 15: Shock
The maximum non-operating vibration levels that the drive may experience without incurring physical damage or degradation in performance when subsequently put into operation are specified below. 5Hz to 22Hz 3.0 Gs (Limited displacement) 22Hz to 350Hz 3.0 Gs 350Hz to 500Hz 3.0 Gs Seagate FireCuda Product Manual, Rev. A... -
Page 16: Acoustics
Seagate follows the ECMA-74 standards for measurement and identification of PDTs. An exception to this process is the use of the absolute threshold of hearing. Seagate uses this threshold curve (originated in ISO 389-7) to discern tone audibility and to compensate for the inaudible components of sound prior to computation of tone ratios according to Annex D of the ECMA-74 standards. -
Page 17: Warranty
(or part number) and country of purchase. The system will display the warranty information for the drive. 2.12.1 Storage Maximum storage periods are 180 days within original unopened Seagate shipping package or 60 days unpackaged within the defined non-operating limits (refer to environmental section in this manual). Storage can be extended to 1 year packaged or unpackaged under optimal environmental conditions (25°C, <40% relative humidity non-condensing, and... -
Page 18: Fcc Verification
As a subassembly, no Federal Communications Commission verification or certification of the device is required. Seagate has tested this device in enclosures as described above to ensure that the total assembly (enclosure, disk drive, motherboard, power supply, etc.) does comply with the limits for a Class B computing device, pursuant to Subpart J, Part 15 of the FCC rules. -
Page 19: China Requirements - China Rohs 2
The silver, copper, nickel and gold films used in Seagate products are especially sensitive to the presence of sulfide, chloride, and nitrate contaminants. Sulfur is found to be the most damaging. -
Page 20: Configuring And Mounting The Drive
For installations which require cables, users can connect the drive as illustrated in Figure 1 Figure 1 Attaching SATA cabling Signal connector Power connector Signal cable Power cable Each cable is keyed to ensure correct orientation. FireCuda drives support latching SATA connectors. Seagate FireCuda Product Manual, Rev. A... -
Page 21: Drive Mounting
2X 1.750 ± .010 in 41.28 ± .51 mm 44.45 ± .25 mm 2X 0.130 in 3.30 mm 4X 6-32 UNC-2B 3 MINIMUM THREAD DEPTH 0.12 MAXIMUM FASTENER PENETRATION 2X 3.740 in 95.00 mm Seagate FireCuda Product Manual, Rev. A... - Page 22 Configuring and Mounting the Drive Figure 3 Mounting dimensions (1TB model) 0.7825 in max 20.17mm 0.12 0.12 Seagate FireCuda Product Manual, Rev. A...
-
Page 23: Sata Interface
There are three power pins for each voltage. One pin from each voltage is used for pre-charge when installed in a blind-mate backplane configuration. • All used voltage pins (V ) must be terminated. Seagate FireCuda Product Manual, Rev. A... -
Page 24: Supported Ata Commands
Read Sectors Extended Read Sectors Without Retries Read Verify Sectors Read Verify Sectors Extended Read Verify Sectors Without Retries Recalibrate Security Disable Password Security Erase Prepare Security Erase Unit Security Freeze Security Set Password Security Unlock Seagate FireCuda Product Manual, Rev. A... - Page 25 Write DMA Extended Write DMA FUA Extended Write DMA Without Retries Write Log Extended Write Multiple Write Multiple Extended Write Multiple FUA Extended Write Sectors Write Sectors Without Retries Write Sectors Extended Write Uncorrectable Seagate FireCuda Product Manual, Rev. A...
-
Page 26: Identify Device Command
Number of current logical heads xxxx Number of current logical sectors per logical track xxxx 57–58 Current capacity in sectors xxxx Number of sectors transferred during a Read Multiple or Write Multiple command xxxx Seagate FireCuda Product Manual, Rev. A... - Page 27 Total number of user-addressable LBA sectors available (see Section 2.2 for related ST2000DX002 = 3,907,029,168 information). These words are required for drives that support the 48-bit addressing ST1000DX002 = 1,953,525,168 feature. Maximum value: 0000FFFFFFFFFFFFh. Seagate FireCuda Product Manual, Rev. A...
- Page 28 Seagate-reserved xxxx 160–254 ATA-reserved 0000 Integrity word xxA5 Automatic Acoustic Management (AAM) features are not supported. Note See the bit descriptions below for words 63, 84, and 88 of the Identify Drive data. Note Seagate FireCuda Product Manual, Rev. A...
- Page 29 Ultra DMA mode 2 is currently active. Ultra DMA mode 3 is currently active. Ultra DMA mode 4 is currently active. Ultra DMA mode 5 is currently active. Ultra DMA mode 6 is currently active. Seagate FireCuda Product Manual, Rev. A...
-
Page 30: Set Features Command
Disable use of SATA features Enable read look-ahead (read cache) feature (default). Report full capacity available At power-on, or after a hardware or software reset, the default values of the features are as indicated above. Note Seagate FireCuda Product Manual, Rev. A... -
Page 31: Commands
S.M.A.R.T. Enable Operations S.M.A.R.T. Disable Operations S.M.A.R.T. Return Status If an appropriate code is not written to the Features Register, the Note command is aborted and 0x04 (abort) is written to the Error register. Seagate FireCuda Product Manual, Rev. A... - Page 32 ASIA/PACIFIC Seagate Singapore International Headquarters Pte. Ltd. 7000 Ang Mo Kio Avenue 5, Singapore 569877, 65-6485-3888 EUROPE, MIDDLE EAST AND AFRICA Seagate Technology SAS 16-18 rue du Dôme, 92100 Boulogne-Billancourt, France, 33 1-4186 10 00 Publication Number: 100804185, Rev. A...
Need help?
Do you have a question about the FIRECUDA ST2000DX002 and is the answer not in the manual?
Questions and answers