Counting Application - LevelOne CamCon FCS-1060 User Manual

IP CamSecure
Config

Counting Application

Step 1
Step 2
Step 3
Start Simulation
Options Runtime
*Counting Application is only in IP CamSecure Pro/Pro Plus/Pro Mega.
Step 1: Check the box of the camera to apply the Counting Application on it.
Step 2: In Operation section, define the detection zones you want. Drag the cruise to draw Region
1 and Region 2
Step 3: Define the object size on the screen. Objects in the size going across these two Regions
will be counted.
Options: 1Way Counting will take objects going from Region 1 to Region 2 as one count. In 2 Way
Counting mode, it counts either going from Region 1 to Region 2 or Region 2 to Region 1.
Runtime: Check the boxes to show the counting result on the screen or/and show object bounding
box, which draws the shape of the object that the system detects in red squares. You can choose
from the full-down menu of how long you want to reset the counting number.
Start Simulation: Click to test the setting.
76