Encoding Options Panel - LevelOne CamCon FCS-1060 User Manual

IP CamSecure
Guard

Encoding Options Panel

Always Record: Select this option to record the video at all time.
Record on Event: Select this option to obtain the Select Event panel. From the Smart
Guard/Digital Input list, check the box of the camera(s) that you want to trigger the recording action.
Click OK to complete the setting.
*Smart Guard is only in IP CamSecure Pro/Pro Plus/Pro Mega.
Record on Motion: Select this option to start recording when there are motions detected. You may
adjust the sensitivity and the frame interval.
Pre-record/ Post-record Time: The pre-record/ post-record function saves the recording data
accordingly. For instance, to set up a 5 second pre-record time means the system will start saving
the recording data 5 seconds before the event happens.
Copy To: You may set up the schedule for each channel/camera by repeating the process above,
or simply apply the setting of a single camera to all the others.
Select Event Panel
Always Record
Record on Event
Record on Motion
Pre-record/ Post-record
38