Advertisement
Bosch Flue and Ventilation Quick Reference Guide 2022
Vertical Flue termination
Please note:
When placing multiple flues together on a roof, they 'must not' protrude through the roof at multiple heights
distance between each flue is at a minimum of 1500mm from each other, and at a minimum distance of 500mm from a chimney or
(figure
13)
obstruction
.
Figure 12
The below
(figure
14)
provides a representation of the preferred way to terminate multiple flues on a vertical roof.
Figure 14
Whilst it is always our intention to fully assist, it is essential to recognise that all information given by the company in response to an enquiry of any nature is provided in good faith and based
upon the information provided with the enquiry. We recommend that advice should always be checked with your installer or contract partner. Consequently, the company cannot be held
responsible for any liability relating to the use or repetition of such information or part thereof. In addition, whilst making every reasonable effort to monitor the performance and quality of
our supply, installation and service network, we do not accept responsibility for the workmanship or operation of any third party company that the company may have promoted either in
conversation, e-mail, or other communication. Similarly, the views and opinions expressed in communication with individuals within the company may not reflect that of the business as a whole.
You can find this, and all issued technical bulletins on the Worcester website at: worcester-bosch.co.uk/tb or worcester-bosch.ie/tb
Worcester, Bosch Group, Cotswold Way, Warndon, Worcester WR4 9SW Technical Services: 0330 123 3366 | technical-advice@uk.bosch.com
(figure
12)
, unless the
Figure 13
12
Advertisement
