Fitting Output Shaft Elements; Correct Position Of Output Shaft Elements - DANA BREVINI M Series Installation And Maintenance Manual

FITTING OUTPUT SHAFT ELEMENTS

9.1 FITTING OUTPUT SHAFT ELEMENTS
Use the following illustration to assemble output shaft units

9.2 CORRECT POSITION OF OUTPUT SHAFT ELEMENTS

The Output Shaft unit (transmission elements) must placed as close as possible to the gear unit so that the radial load is as
closest as possible to the gear unit.
1 -
Hub
24 Dana Incorporated
1 -
Shaft
2 - Bearing
3 - Coupling Hub
IMM-0019EN - Installation and Maintenance Manual