Using The On-Screen Display (Osd) Controls - Lenovo L2262 User Manual

Using the On-Screen Display (OSD) controls

To adjust the settings, the user controls can be viewed through the OSD.
To use the controls:
1. Press to open the main OSD menu.
2. Use or to move among the icons. Select an icon and press
function. If there is a sub-menu, you can move between options using
then press
save.
3. Press to move backwards through the sub-menus and exit from the OSD.
4. Press and hold
adjustments to the OSD. Press and hold
allow adjustments to the OSD.
5. Enables DDC/CI by default. Use OSD Exit Key
10 seconds to disable / enable DDC/CI function. The words "DDC/CI disable"
shows on the screen.
Brightness/Contrast
Brightness
Exit Left Right
to select that function. Use
for 10 seconds to lock the OSD. This will prevent accidental
Contrast
Ok
or to make adjustments. Press
for 10 seconds to unlock the OSD and
, Press and hold the
to access that
or ,
to
button for
2-4
Chapter 2.