Lenovo suggests that standard power line provided by Lenovo should be used otherwise, Lenovo bears no liability for any problem resulting from the use of the power line of other manufacturers. For displays with glossy bezels the user should consider the placement of the display as the bezel may cause disturbing reflections from surrounding light and bright surfaces.
Chapter 1. Getting started This User’s Guide contains detailed information of your Flat Panel Monitor. For a quick overview, please see the Setup Poster that was shipped with your monitor. Shipping contents The product package should include the following items: •...
Attaching the base and handling your monitor To set up your monitor, please see the illustrations below. Note: Do not touch the monitor within the screen area. The screen area is glass and can be damaged by rough handling or excessive pressure.
Monitor controls Your monitor has controls on the front which are used to adjust the display. For information on how to use these controls, please see “Adjusting your monitor image” on page 2-3. Cable lock slot Your monitor is equipped with a cable lock slot located on the rear of your monitor (in the lower position).
Setting up your monitor This section provides information on how to set up your monitor. Connecting and turning on your monitor Note: Be sure to read the Safety information located on page iii before carrying out this procedure . Power off your computer and all attached devices, and unplug the computer power cord.
Insert the power cord into the monitor ,then plug the monitor power cord and the computer cord into grounded electrical outlets. Place the cable into the specific hook indicated in below figure. Note: A certified power supply cord has to be used with this equipment. The relevant national installation and/or equipment regulations shall be considered.
Thank you for purchasing this Lenovo product. Please take a few moments to register your product and provide us with information that will help Lenovo to better serve you in the future. Your feedback is valuable to us in developing products and services that are important to you, as well as in developing better ways to communicate with you.
Chapter 2. Adjusting and using your monitor This section will give you information on adjusting and using your monitor. Comfort and accessibility Good ergonomic practice is important to get the most from your personal computer and to avoid discomfort. Arrange your workplace and the equipment you use to suit your individual needs and the kind of work that you perform.
• Use the monitor brightness, contrast, and image adjustment controls, if equipped, to optimize the image on your screen to meet your visual preferences. • Keep your monitor screen clean so you can focus on the screen’s contents. Any concentrated and sustained visual activity can be tiring for your eyes. Be sure to periodically look away from your monitor screen and focus on a far object to allow your eye muscles to relax.
Adjusting your monitor image This section describes the control features to adjust your monitor image. Using the direct access controls The direct access controls can be used when the On Screen Display (OSD) is not displayed. Table 2-1. Direct access controls Icon Control Description...
Using the On-Screen Display (OSD) controls To adjust the settings, the user controls can be viewed through the OSD. Brightness/Contrast Brightness Contrast Exit Left Right To use the controls: Press to open the main OSD menu. to move among the icons. Select an icon and press to access that function.
Table 2-2. OSD functions Controls and Controls and OSD Icon on Main Adjustments Adjustments Menu Submenu Description (Analog) (Digital) Adjusts overall screen Same as Analog brightness Brightness Brightness/ Contrast Adjusts difference between light and dark areas Contrast Moves image left or right. Controls Locked ...
Table 2-2. OSD functions Controls and Controls and OSD Icon on Main Adjustments Adjustments Menu Submenu Description (Analog) (Digital) Same as Analog Selects type of scaled image • Original AR: same aspect ratio with input signal Scaling • Full Screen :Expand image to full screen. Screen Prioritization Text Mode •...
Selecting a supported display mode The display mode the monitor uses is controlled by the computer. Therefore, refer to your computer documentation for details on how to change display modes. The image size, position and shape might change when the display mode changes. This is normal and the image can be readjusted using automatic image setup and the image controls.
Understanding power management Power management is invoked when the computer recognizes that you have not used your mouse or keyboard for a user-definable period. There are several states as described in the table below. For optimal performance, switch off your monitor at the end of each working day, or whenever you expect to leave it unused for long periods during the day.
Caring for your monitor Be sure to turn off the power before you perform any maintenance on the monitor. Do not: • Apply water or liquid directly to your monitor. • Use solvents or abrasives. • Use flammable cleaning materials to clean your monitor or any other electrical equipment.
Chapter 3. Reference information This section contains monitor specifications, instructions to manually install the monitor driver, troubleshooting information, and service information. Monitor specifications L2262wA Table 3-1. Monitor specifications for type-model Dimensions Height Depth Width Stand Tilt Range: -5°, +20° VESA mount Supported Image Viewable image size...
L2262wA Table 3-1. Monitor specifications for type-model Communications VESA DDC Supported Display Modes Horizontal frequency 30 kHz - 83 kHz(Pixel clock <210MHz) (VESA Standard modes 50 Hz - 76 Hz Vertical frequency (Pixel clock <210MHz) between noted ranges) Native Resolution 1920 x 1080 at 60 Hz Temperature Operating...
Troubleshooting If you have a problem setting up or using your monitor, you might be able to solve it yourself. Before calling your dealer or Lenovo, try the suggested actions that are appropriate to your problem. Table 3-2. Troubleshooting Problem...
Table 3-2. Troubleshooting Problem Possible cause Suggested action Reference The video signal cable Be sure the video cable is “Connecting and The power is loose or connected with the turning on your indicator is white, disconnected from the system properly. monitor”...
Installing the monitor driver in Windows 7 To use the Plug and Play feature Microsoft Windows 7, do the following: Note: You must download file from the Lenovo Monitor CD to use the Plug and Play feature in Windows 7.
Installing the monitor driver in Windows Vista To use the Plug and Play feature Microsoft Windows Vista, do the following: Note: You must download file from the Lenovo Monitor CD to use the Plug and Play feature in Windows Vista.
Color Matching Profiles. Note: On LCD monitors, unlike CRTs, a faster refresh rate does not improve display 1920x1080 quality. Lenovo recommends using either at a refresh rate of 60 Hz, or 640 x 480 at a refresh rate of 60 Hz.
Appendix A. Service and Support The following information describes the technical support that is available for your product, during the warranty period or throughout the life of your product. Refer to the Lenovo Limited Warranty for a full explanation of Lenovo warranty terms.
Consult your local Lenovo representative for information on the products and services currently available in your area. Any reference to a Lenovo product, program, or service is not intended to state or imply that only that Lenovo product, program, or service may be used. Any functionally equivalent product, program, or service that does not infringe any Lenovo intellectual property right may be used instead.
Collecting and recycling a disused Lenovo computer or monitor If you are a company employee and need to dispose of a Lenovo computer or monitor that is the property of the company, you must do so in accordance with the Law for Promotion of Effective Utilization of Resources.