Table of Contents
Advertisement
Using the On-Screen Display (OSD) controls
To adjust the settings, the user controls can be viewed through the OSD.
Model
Resolution
Max Refresh Rate
Mode
Firmware
Serial Number
Input Signal: HDMI
To use the controls:
1.
Press
to open the main OSD menu.
2. Use
or
function. If there is a sub-menu, you can move between options using
press
to select that function. Use
3.
Press
to move backwards through the sub-menus and exit from the OSD.
4.
Press and hold
adjustments to the OSD. Press and hold
adjustments to the OSD.
5.
Enables DDC/CI by default. Use OSD Exit Key, press and hold
disable / enable DDC/CI function. A message "DDC/CI disable" is shown on the screen.
G24-10
G24-10
1920x1080
60.0Hz
Normal
Firmware Version
Serial Number
to move among the icons. Select an icon and press
for 10 seconds to lock the OSD. This will prevent accidental
1920x1080
60Hz
@
or
to make adjustments then press
for 10 seconds to unlock the OSD and allow
to access that
or
, then
to save.
for 10 seconds to
2-4
Chapter 2.
Advertisement
Table of Contents
