Using On-Screen Display (Osd) Controls - Lenovo L24i-40 User Manual

Using On-Screen Display (OSD) controls

To use the controls:
1� Press
2� Use
there is a sub-menu, you can move between options using
Use
3� Press
4� Enables DDC/CI by default� Use OSD Exit Key, Press and hold
enable DDC/CI function� A message "DDC/CI disable" is shown on the screen�
2-2 L24i-40 Flat Panel Monitor User's Guide
To adjust the settings, the user controls can be viewed through the OSD�
Basic Settings
Color Settings
Port Settings
Menu Settings
Input Signal:HDMI
to open the main OSD menu�
or to move among the icons� Select an icon and press
or to make adjustments then press
to move backwards through the sub-menus and exit from the OSD�
L24i-40
Brightness
Contrast
DCR
Display mode
Scaling Mode
Over Drive
Volume
Mute
Video range
Resolution : 1920*1080 Refresh Rate : 100Hz
to save�
to access the selected function� If
or , then press to select that function�
for 10 seconds to disable/