Zennio ALLinBOX 1612 v2 Manual page 4

IP interface
➢ Up to 5 parallel connections from ETS for programming and monitoring.
➢ High capacity buffer
6 light indicators (LEDs): two state indicators for the power supply (power
and overload), one power supply factory reset indicator, two state indicators
for the lines (bus and Ethernet), one more IP factory reset indicator, and one
additional indicator for the programming mode.
Power supply 29V – 1.4 A (40W). It is divided between an auxiliary output of
29V and a bus output with KNX coil include. The nominal input of the power
supply must be universal 110/230V ~ 50/60Hz.
http://www.zennio.com Technical Support: http://support.zennio.com
ALLinBOX 1612 v2
4