udir/c UD1805 Operating Instructions Manual page 12

After the car power is turned on, the transmitter and the car will carry out automatic frequency matching. When the indicator light of the
transmitter and the car lights are always on, the frequency matching is successful. In the process of frequency matching, the car lights
will flash rapidly. At this time, the gyroscope is being calibrated automatically. Please place the car on the level ground to complete this
operation. After calibration, the car lights return to normal.
2>
Throttle trigger
Go forward
1601-011 Power on method
2) Press for 2 second to turn on the power. The lights flash and
enter the frequency matching state. Press for 2 second to turn off
the power.
ESC01W Power on method
2) Press for 2 second to turn on the power. The lights flash and
enter the frequency matching state. Press for 2 second to turn off
the power.
Manipulation method
12
1601-011
ESC01W
Throttle trigger
Go backward