Husqvarna 533RS Operator's Manual page 47

• Examine the support flange for cracks. Replace the
support flange if it is damaged.
• Make sure that the locknut can not be removed by
hand. If you can remove it by hand, it does not
lock the cutting attachment sufficiently and you must
replace it.
• Examine the blade guard for damages or cracks.
Replace the blade guard if it has been hit or if it has
cracks.
• Examine the trimmer head and cutting attachment
guard for damages or cracks. Replace the trimmer
head and cutting attachment guard if they have been
hit or if they have cracks.
To start the product (533RS)
1. Move the stop switch to the start position.
1756 - 001 - 08.06.2022
2. Push the air purge bulb until fuel starts to fill the air
purge bulb.
3. Move the choke control to the choke position.
4. Hold the product to the ground.
5. Pull the starter rope handle slowly with your right
hand until you feel resistance.
WARNING:
rope around your hand.
CAUTION:
rope to full extension and do not let go of
the starter rope handle. This can cause
damage to the product.
6. Pull the starter rope handle quickly and with force
until the engine starts.
7. Set the choke control to the operation position.
Do not wind the starter
Do not pull the starter
47