Download Print this page
Great Little Trading L5289 Assembly Instructions Manual

Great Little Trading L5289 Assembly Instructions Manual

Large townhouse bookcase

Advertisement

Quick Links

Large Townhouse Bookcase
Assembly Difficulty
Two-person job
easy -
medium
- hard
L5289
V2
16/03/22
Thank you for shopping with GLTC, we hope you enjoy
having this product in your home.
We know assembling furniture, toys or accessories is not everyone's
favourite way to spend their time, so we've tried to make assembling
this item as quick and painless as possible.
A few important pointers before you start:
Please read the instructions right through before you start, and
check that all the components have been included in the pack;
we find separating all the hardware into piles makes it easier to
be sure that everything is present and correct.
Make sure you have the right tools. Allen keys are provided
if required, but screw drivers and other tools are not. You'll
find details of the tools you need at the beginning of the
instructions.
It's a good idea to build the unit in the room where you are
going to be using it, to avoid the need to move it after it's been
assembled.
Do not throw away any packing materials until assembly is
complete, just in case you accidentally discard smaller parts or
hardware.
1

Advertisement

loading
Need help?

Need help?

Do you have a question about the L5289 and is the answer not in the manual?

Questions and answers

Summary of Contents for Great Little Trading L5289

  • Page 1 Large Townhouse Bookcase A few important pointers before you start: L5289 • Please read the instructions right through before you start, and check that all the components have been included in the pack;...
  • Page 2 WARNING! IN ORDER TO PREVENT OVERTURNING THIS PRODUCT MUST BE USED WITH THE WALL ATTACHMENT DEVICE PROVIDED. Please see further information in the assembly manual and on the back panel. Customer Service: • If you find that any components are missing or damaged, please do not begin assembly and do not use the item.
  • Page 3 Component Check List Component Check List 2x Mid Back Panels 1x Upper Back Panel 1x Side Panel 1x Side Panel 1x Lower Back Panel Hardware Check List 1x Mid Shelf 1x Upper Shelf 14x Cam Dowels 22x Cam Locks 1x Vertical Slotting Divider 1x Horizontal Slotting Divider 4x Pivoting Cam Dowels 28x Wooden Dowels...
  • Page 4 Hardware for Step 1: 12x #2 Cam Dowels Large Drill Holes Large Drill Holes BASE BASE Small Drill Holes Small Drill Holes STEP 1: STEP 2: Working on a protective surface such as a carpet or rug, take both side Please note, you are building this unit BACK UP.
  • Page 5 Hardware for Step 3: Hardware for Step 4: Using Cam Locks: When inserting into the panel, ensure that each cam lock’s arrow is pointing towards the drill hole on the side edge of the panel & the dowel that it will 2x #2 Cam Dowels 4x #3 Wooden Dowels be receiving.
  • Page 6 Hardware for Step 6: Hardware for Step 5: 2x #3 Wooden Dowels 6x #3 Wooden Dowels Large Drill Holes Large Drill Holes 2x #1 Cam Locks 6x #1 Cam Locks BASE Small Drill Holes BASE Small Drill Holes STEP 6: STEP 5: Insert 2x wooden dowels (#3) into the holes next to the remaining cam Insert 2x wooden dowels (#3) into the inner holes of LH ends of panels...
  • Page 7 Hardware for Step 7: Hardware for Step 8: 6x #3 Wooden Dowels 4x #3 Wooden Dowels 6x #8 Barrel Nuts 4x #7 Crosshead Bolts 6x #7 Crosshead Bolts BASE BASE STEP 7: STEP 8: Attach base panel. Now attach the 4x feet (J) to the base panel (G). Begin by inserting 6x wooden dowels (#3) into the inner holes on the ends of Insert 4x wooden dowels (#3) into the inner hole of each hole set at the panels A, F &...
  • Page 8 Hardware for Step 10: Hardware for Step 9: 4x #4 Pivoting Cam Dowels 2x #5 Double ended Cam Dowel STEP 9: Prepare the roof panels (H & I) by inserting 2x pivoting cam dowels (#4) into the outer small holes of BOTH panels as shown. The holes are drilled at an angle and it is best to insert the hardware at the same angle as the hole.
  • Page 9 Hardware for Step 12: Hardware for Step 11: Start 1st Position Final Position 4x #3 Wooden Dowels 4x #1 Cam Locks 4x #1 Cam Locks STEP 12: STEP 11: Prepare to attach the roof by inserting 4x wooden dowels (#3) into the inner holes on the ends of both side panels (A &...
  • Page 10 Insert 26x back panel screws (#6) into the holes shown - please note there are 2 holes highlighted that need to be left for for anti-tip kit applied in step 14. Copyright© 2022 G.L.T.C. Ltd. All rights reserved. Great Little Trading Company and GLTC are registered trade marks of G.L.T.C. Limited.