A Power Switch Problem; Keyboard Problems - IBM ThinkPad R32 2658 Supplementary Manual

Lenovo thinkpad r32 2658: supplementary guide
Hide thumbs Also See for ThinkPad R32 2658:
Table of Contents

Advertisement

Solving computer problems
Attention: You might want to note your password and keep it in a safe
place. If you forget your supervisor password, IBM will not reset your
password. You must take your computer to an IBM reseller or IBM marketing
representative to have the system board replaced. Proof of purchase is
required, and a fee will be charged for parts and service.

A power switch problem

Problem: The system does not respond, and you cannot turn off the computer.
Solution: Turn off the computer by pressing and holding the power switch for
4 seconds or more. If the system is still not reset, remove the ac adapter and
the battery.

Keyboard problems

Problem: The cursor does not move after the computer awakens from one of
the power management modes.
Solution: Make sure you followed the instructions in the on-board help,
Access ThinkPad correctly if you reinstalled Windows with the Advanced
Power Management (APM) option.
Note: The APM function is supported in Windows 98 and Windows NT.
Problem: All or some keys on the keyboard do not work.
Solution: If the problem occurred immediately after the computer returned
from standby mode, enter the power-on password if one has been set.
If an external keyboard is connected, the numeric keypad on your computer
does not work. Use the numeric keypad on the external keyboard.
If an external numeric keypad or a mouse is connected:
1. Turn off the computer.
2. Remove the external numeric keypad or the mouse.
3. Turn on the computer and try using the keyboard again.
If the keyboard problem is resolved, carefully reconnect the external numeric
keypad, external keyboard, or mouse, making sure that you have seated the
connectors properly.
If keys on the keyboard still do not work, have the computer serviced.
Problem: A number appears when you type a letter.
Solution: The numeric lock function is on. To disable it, press and hold Shift;
then press NumLk.
18
®
ThinkPad
R32 Service and Troubleshooting Guide

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Thinkpad r32Thinkpad r32

Table of Contents