Control Functions - Nexus STANDARD MP V3 User Manual

the side. Insert the 10 batteries, in their correct alignments, into
the plastic holder and make sure that all the terminals have a
good electrical contact. Locate the battery holder into the
compartment, ensuring the connecting terminals of the battery
holder are in good contact with the two electric spring loaded
terminals behind the recharge socket. Do not over-tighten the
plastic thumb screws when refitting.
If you wish to use headphones (highly recommended) connect
your available set to the 6 mm jack socket on the battery box.
The Nexus Standard MP has an internal loudspeaker so
headphones are not absolutely essential. For any headphones
that have a volume control, ensure that this is set to MAXIMUM
and use the Nexus Standard MP Volume knob on the control box
to set the volume level.
Controls
3.