Troubleshooting - Nexus STANDARD MP V3 User Manual

Troubleshooting

1. The detector does not turn on.
Check the batteries. If they are old, replace them with new. Make
sure the batteries are properly inserted into the battery holder and
have a good electrical contact.
2. The detector is giving too many false signals.
Check the Ground Balance if it is adjusted correctly according to
the ground balance procedure. If the problem still persists, check
if the soil does not contain hot rocks or other contaminants. If this
is the case then use Mineral Control to stop the interference.
3. The detector is picking up too much Iron .
Check the Discrimination level according to the recommended
Settings.
4. I only plug the search coil and detector does not work after
that.
Make sure that it is the correct search coil for your Nexus model.
The search coils for Nexus Standard MP V3 are interchangeable
only with coils manufactured for the MP range, MP V1, MP V2
and MP V3.
5. One or more control functions does not work.
Make sure that you know how to use those control functions
according to this User Manual. In case that any of the control
functions do not cause any change of response in the detector
13.