Care Of The Standard Mp; Technical Specifications - Nexus STANDARD MP V3 User Manual

Care of the Nexus Standard MP
All metal detectors are precision instruments and require careful
handling to ensure they remain in good working order. Avoid
dropping, impacts or violent shaking of the detector and protect it
while transporting. The detector should not be used in very wet
weather conditions, without protecting the control box and the
battery. The coil assembly is fully waterproofed. If water
penetrates any of the boxes, switch off the detector and remove
the batteries. It is suggested that the detector be placed in a
warm place to dry out slowly.
Mud and soil should be carefully removed, using a damp cloth or
water only. Do not use detergents or abrasives and avoid getting
water in the control boxes.
When storing the detector for long periods or when shipping, the
batteries should be removed.
Avoid storing the detector in areas where it will be exposed to
extreme temperatures, dust, moisture or contaminants.
Do not attempt to modify or repair the detector or allow any
unauthorised repair centre to do so.

Technical Specifications

Weight: (main unit only) 1.0 kg (without batteries).
Coil Case Construction: ABS plus Fibreglass or Carbon Fibre.
Audio Frequency: Custom tuned.
Audio Output: 6mm stereo headphone jack.
Power Supply: Up to 16v (10 AA alkaline batteries).
Battery Life: Up to 12 hours if only headphones are in use.
Operating Modes: All-Metal, VCO Multi tones.
Optimum Temperature Range: -15° to +60°C
Optimum Humidity Range: 0 to 85% RH
12.