Advertisement
Quick Links
Advertisement
Related Manuals for Nexus Metal Detectors
Summary of Contents for Nexus Metal Detectors
- Page 1 NEXUS Metal Detectors Telephone +44(0)1442780922 User Manual...
-
Page 2: General Description
However if used with any of the accessory search coils available from the SE range the Nexus Standard SE will be one of the most versatile metal detectors available on the market. -
Page 3: Assembly And Preparation
Connect the headphones to the 6mm jack socket on the battery box. The Nexus Standard SE does not have an internal loudspeaker so headphones are essential. For any headphones that have a volume control, ensure that this is set to MAXIMUM and use the Nexus Volume knob to set the volume level. - Page 4 CONTROLS The Nexus Standard SE has seven primary control knobs and one toggle switch control. Six of the rotary controls are located on the front of the control box and the seventh is located on the back of the Meter box. The toggle switch control is located underneath the Meter box.
-
Page 5: Operation
Ground Balance This knob is used to set the balance of the Nexus Standard SE to suit the soil conditions on any given site. Voltage Controlled Oscillator (VCO) This knob turns on or off the VCO and it also sets the frequency pitch for the target responses. - Page 6 First ensure that no metal is in close proximity to the coil. It is also advisable to carry out the tuning and setting up of the Nexus away from other detectors or potential sources of electronic interference.
- Page 7 Finally, check again the threshold and volume settings for comfortable levels. The Nexus Standard SE is now ready for use. The coil should be swung smoothly and quite slowly (approx. 1,5 second per swing) from side to side, above the ground surface.
- Page 8 TIPS The Nexus Standard SE may seem very different in operation to some detectors presently available. Some practice and experimentation with the settings are necessary to get the best results on different sites.
- Page 9 It must always be remembered that no detector can find what is not there – nor can any detector give a signal unless the coil is passed directly over that target. Using the Nexus Standard SE will guarantee good finds if the proper adjustments are mastered and the searched site contain desired targets.
- Page 10 We can guarantee that the Nexus Standard SE will be capable to find a large coin (30mm in diameter) at depth at least 14" (36cm) under compact very wet sand in most beaches around the world.
-
Page 11: Technical Specifications
Do not attempt to modify or repair the detector or allow any unauthorised repair centre to do so. GUARANTEE The Nexus Standard SE metal detector is guaranteed for a period of 24 months from date of purchase against all manufacturing defects or loss of performance. - Page 12 Coil Case Construction: ABS Glass Fibre resin potted Audio Frequency: Custom tuned Audio Output: 6mm stereo headphone jack Power Supply: 12v (8 AA alkaline batteries) Battery Life: up to 45 hours intermittent Operating Modes: All-Metal and Discriminate Optimum Temperature Range: -15° to +60° C Optimum Humidity Range: 0 to 85% RH...